Dental sealing machine hospital sterilization bag pouch sealing machine medical thermal sealer

Name: Dental Sterilization Bag Sealing Machine
​Power supply: 110-220V, 50Hz/60Hz
​Power: 200W
​Maximum temperature: 300°C
​Preheating time: 2min
​Sealing width Max: 250mm
​Seal length: 3000mm
​Impress width: 10mm
​Weight: 6kg
​Size: 41.5*30.5*32CM
​Operating Instructions:
​1. Power supply: access (AC220-240V/50Hz)
​2. There are 1 to 6 gears on the temperature regulator, and the maximum temperature is 300°C
​3. Sealing and cutting steps are as follows:
​①Turn on the power switch on the sealing machine. It takes about 2 minutes for the sealing to preheat. When the indicator light goes out, you can start the sealing operation. (Note: The sealing plate is always in a high temperature state, please avoid direct skin contact.)
​②Adjust the sealing temperature. In order to avoid the unsatisfactory sealing effect due to too high or too low temperature, the knob should be turned to the 3rd to 4th position, and the temperature is about 180°C.
​③Put the packaging bag (paper-plastic bag) on the reel support, pass the one-end of the packaging bag through the back of the pressing plate and the sealing plate, come out from the front, and pull it to the required length. The paper side must face down, and pull down the sealing handle Until pressure is felt, a seal is created, making sure there is always seal pressure. Quickly drag the handle of the cutter, and the cutting blade cuts across the packaging bag. At this time, one end of the packaging bag has been sealed. Put the items from the other end of the packaging bag and seal the opening.
​(Note: If the sealing handle is not fully pressed, the sealing pressure will not be achieved, and the quality of the seal will be affected. The sealing handle cannot be relaxed during sealing. This process will last for about 4 seconds, and the packaging bag will be cut at the same time. , the sealing is completed; if the blade cuts too slowly, the packaging bag will not be cut correctly; the cutting blade has cutting functions on the left and right sides.)